KMX5000 AP communication module

KMX5000 AP communication module

KMX5000 AP communication module

Communication module for the operation of UniVario detectors on fire alarm panels with Loop AP protocol.
By simply plugging the module into the detector,
a conventional detector is turned into an analogue addressable detector. The detector address is set
via DIP switches. Power supply and communications
are connected via the ring bus; no additional
power supply is required.
The communication module can be used for all standard and 3GD (Zone 2 and 22) UniVario detectors.

Optical smoke detector OMX SA-I

Analog addressable optical smoke detector.
Designed for use in swelling fires or fires with strong smoke development. New sensor technology reduces false alarms and increases reliability in detecting real fires.
Designed for operation on fire alarm control panels with Loop AP protocol. Five sensitivity levels adjustable via software control. Isolator is integrated in electronics. Addressing via separate address card. The address can also be changed after installation.

Heat detector WMX SA-1

Analog addressable heat detector with two lateral thermistors. Designed for use as differential or maximum detector. Use as differential detector e.g. in rooms with constant low ambi-ent temperature. Use as maximum detector in rooms, where temperature variations are to be expected. Designed for operation on fire alarm control panels with Loop AP protocol. Three sensitivity levels and two temperature ranges adjustable via software control. Addressing via separate address card. The address can also be changed after installation.

Thermal detection – UniVario Heat detectors WMX5000

They are designed specifically for operation in polluted industrial environments, both indoors and outdoors. In addition to static temperature detection, rapid rises in temperature can also be registered by the rate-of-rise method, for early fire detection. Designed for operation as a conventional detector. Expansion to a detector with Loop AP protocol via KMX5000 AP communication module.

Optical detection – UniVario IR flame detector FMX5000 IR

Triple IR flame detector for the detection of typical fires. Including 3 channel optic test monitoring all functional characteristics of detector. Designed for use in rough industrial environments. Equipped for operation as a conventional detector. Expansion to a detector with Loop AP protocol via KMX5000 AP communication module.
New uniform optics.

Optical detection – UniVario UV flame detector FMX5000 UV

UV flame detector for the detection of typical fires. Including UV optic test monitoring all functional characteristics of detector. Designed for use in rough industrial environments and for operation as a conventional detector. Expansion to a detector with Loop AP protocol via KMX5000 AP communication module.

Argon cylinder 200 bar EU with valve type K85

– UN1006 argon compressed, 200 bar,
– Extinguishing agent cylinder, Extinguishing agent: argon, – Filling pressure at 15 °C (288 K): 200 bar,
– Filling quantity: 24,1 kg / 28,6 kg,
– Part no.: 888248 / 888251, with odorant

Argon cylinder 80 l 300 bar EU with valve type K85

– UN1006 argon compressed, 300 bar,
– Extinguishing agent cylinder, Extinguishing agent: argon, – Filling pressure at 15 °C (288 K): 300 bar,
– Filling quantity: 40,9 kg,
– Part no.: 888254 / 888315, with odorant

Odorizing device MX 1/2

The odorizing device MX1/2 admixes concentrated odor fluid at stationary CO2-, IG-01-, IG-100-, IG-55- and IG-541 fire extinguishing systems.

Cylinder ø25 x H30

Release cylinder for pneumatic activation e.g.
release box VZ, door release – type FH, limit switch pneum. operated, CO2/Ar 1 – cylinder system pneum.