Products

Products

Products

Strainer DN80 – 200 G/G cast version, red

strainer with coarse sieve: sprinkler systems and deluge systems with nozzle diameter ≥ 8,0 mm

Hose CO2 / IG W21 365 bar

The hose must only be used in accordance with system approval in stationary argon, nitrogen, IG-55, IG-541 and CO2 fire…

Hose CO2 / IG M24 365 bar

The hose must only be used in accordance with system approval in stationary argon, nitrogen, IG-55, IG-541 and CO2 fire…

Pipe couplings PicoFix, flexible DN32 – 200

In fixed water extinguishing systems

Pipe couplings PicoFix, rigid DN25 – 300

In fixed water extinguishing systems

Cap RK PicoFix with female thread DN50 – 250

VdS: for use with VdS approved pipe couplings in fixed water extinguishing systems FM: for use with FM approved pipe…

Cap RK PicoFix without bore DN25 – 250

VdS: for use with VdS approved pipe couplings in fixed water extinguishing systems FM: for use with FM approved pipe…

Tee – RK PicoFix DN25 – 250

VdS: for use with VdS approved pipe couplings in fixed water extinguishing systems FM: for use with FM approved pipe…

DMX3100 manual call point, red

Conventional manual call point for outdoor areas in accordance with EN 54-11. Applicable for operation on conventional lines of the…

DMX3000 manual call point, red

Manual call point for indoor areas, conventional detector in accordance with EN 54-11. An additional weatherproof enclosure with seal set…

DMX3000 Ex manual call point, red

Conventional manual call point for indoor areas in Ex zone 1 or 22 in accordance with EN 54-11. An additional…

DMX3000 LED manual call point, red

Conventional manual call point with red alarm indication (LED) for indoor areas, in accordance with EN 54-11. An additional weatherproof…

Weighing device WE4

The weighing device WE4 may only be used in accordance with the “documentation of special extinguishing systems”. The weighing device…

Push Button Selector Valve

The push button is used in stationary fire extinguishing systems according to the project-specific system diagram. The push button serves…

Input Output Module IOX SA302 R-I

The analogue addressable input module for DIN rail mounting (R) monitors the status of one or more potential-free con-tacts and…

Manual Call Point DMX SA 908-I Red

Analogue addressable manual call point with integrated dual-isolator for indoor areas, in accordance with EN 54-11 and EN54-17. Applicable for…

Beacon PY X-S-05-SSM 24 DC Clear

Visual notification device in clear color for signaling fire hazards, approved according to EN 54-23 and VdS. The beacon is…

Makrofon MX-1

The makrofon is a pneumatically operated acoustic alarm device for the use in stationary gas extinguishing systems accordance with the…

Fire alarm panel FMZ 5000 mod 4 M+

FMZ5000 Fire Alarm Control for Local Protective Signaling Automatic Release of Extinguishing Systems, Preaction and Deluge Sprinkler Systems and Water…

Fire alarm panel FMZ 5000 mod 12 LSZ AP

FMZ5000 Fire Alarm Control for Local Protective Signaling Automatic Release of Extinguishing Systems, Preaction and Deluge Sprinkler Systems and Water…

Fire alarm panel FMZ 5000 mod XL 40U M+

FMZ5000 Fire Alarm Control for Local Protective Signaling Automatic Release of Extinguishing Systems, Preaction and Deluge Sprinkler Systems and Water…

Fire alarm panel FMZ 5000 mod XL 21U

FMZ5000 Fire Alarm Control for Local Protective Signaling Automatic Release of Extinguishing Systems, Preaction and Deluge Sprinkler Systems and Water…

Control Panel FMZ6000 D40

Fire detection and suppression control panel Clunid FMZ6000 in a wall-mounted 19” housing in modern industrial design. Optimum control panel…

Control Panel FMZ6000 D21

Fire detection and suppression control panel Clunid FMZ6000 in a wall-mounted 19” housing in modern industrial design. Optimum control panel…

Control panel FMZ6000 D14

Fire detection and suppression control panel Clunid FMZ6000 in a wall-mounted 19” housing in modern industrial design. Optimum control panel…

Control Panel FMZ6000 D04

The latest control panel technology for use as  a combined fire detection and  suppression control panel in single and multizone…

Release box VZ3

Functional description In the stand-by position the weight bar is resting on the locked weight lever, the wire-rope is engaged…

Control device pneumatic SEP-2

The pneumatic control device is used in stationary gas extin-guishing systems as a manual switch-over device to be able to…

Product Demo Product

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text…

Cylinder rack argon master actuation 200 bar – M300 – 80 l

The battery argon master actuation is used in accordance with the “documentation of special extinguishing systems” in fixed fire extinguishing…

KMX5000 AP communication module

Communication module for the operation of UniVario detectors on fire alarm panels with Loop AP protocol. By simply plugging the…

Optical smoke detector OMX SA-I

Analog addressable optical smoke detector. Designed for use in swelling fires or fires with strong smoke development. New sensor technology…

Heat detector WMX SA-1

Analog addressable heat detector with two lateral thermistors. Designed for use as differential or maximum detector. Use as differential detector…

Thermal detection – UniVario Heat detectors WMX5000

They are designed specifically for operation in polluted industrial environments, both indoors and outdoors. In addition to static temperature detection,…

Optical detection – UniVario IR flame detector FMX5000 IR

Triple IR flame detector for the detection of typical fires. Including 3 channel optic test monitoring all functional characteristics of…

Optical detection – UniVario UV flame detector FMX5000 UV

UV flame detector for the detection of typical fires. Including UV optic test monitoring all functional characteristics of detector. Designed…

Argon cylinder 200 bar EU with valve type K85

- UN1006 argon compressed, 200 bar, - Extinguishing agent cylinder, Extinguishing agent: argon, - Filling pressure at 15 °C (288…

Argon cylinder 80 l 300 bar EU with valve type K85

- UN1006 argon compressed, 300 bar, - Extinguishing agent cylinder, Extinguishing agent: argon, - Filling pressure at 15 °C (288…

Odorizing device MX 1/2

The odorizing device MX1/2 admixes concentrated odor fluid at stationary CO2-, IG-01-, IG-100-, IG-55- and IG-541 fire extinguishing systems.

Nozzle MX1/4-H

The nozzle MX1/4-H may only be used as a room protection nozzle. The nozzle is used for the protection of…

Nozzle MX1/4-H

The nozzle MX1/4-H may only be used as a room protection nozzle. The nozzle is used for the protection of…

nozzles MXD-SD K20 – 57

In water spray systems e.g. acc. to VdS 2109 Water spray systems - Planning and Installation The required design bases…

alarm gong AG2 and alarm group digits

For inside and outside installation notice for outside mounting: A protection pipe for the apertures in wall is not included…

Pressure reducer DK 235 bar

The pressure reducer may only be used in accordance with system approval in stationary argon and nitrogen fire extinguis-hing systems…

Check valve KRV-2

Application The check valve KRV-2 may be used only in accordance with system approval in stationary argon, nitrogen, IG-55, IG-541…

Selector valve MX-BV DN25 – 50 PB235, CO2 / IG / MX 1230/200

The selector valve MX-BV DN 25/40/50 is used in accordance with the “documentation of special extinguishing systems” in fixed CO2,…

deluge valve set AVS-1E FF

The AVS-E1 FF deluge valve set is crucial in controlling the flow of water in a deluge system. These systems…

Nozzle ARGE 1.0 – 2.5

The nozzle ARGE may only be used in accordance with system approval in stationary argon and nitrogen (no CO2) fire…

Pressure reducer type DK 300 300 bar

The pressure reducer may only be used in accordance with system approval in stationary argon and nitrogen fire extinguis-hing systems…

Check valve KRV-2

The check valve KRV-2 may be used only in accordance with system approval in stationary argon, nitrogen, IG-55, IG-541 and…

Disable device MX complete

The ball valve enables the pilot pipe to be shut off. At the same time the pilot pipe is vented…

Check valve KRV-1 complete

The check valve KRV-1 may only be used in accordance with system approval in stationary CO2, argon, IG-55, IG-541 and…

Manifold selector valve DN65/80/100 complete pneumatic, CO2 / inert gas (CF) / MX 1230/200

The manifold selector valve MX-BV DN65/80/100 pneumatic is used in accordance with “documentation of special extin-guishing systems”