Visual notification device in red colour for signaling
fire hazards, approved according to EN 54-23 and VdS. The beacon is impressive due to its safe and simple mounting with external lugs or internal holes, simple electrical connection on the bottom of the casing. Impact-proof lens. Equipped with an electronic soft start module for operation directly on a primary control group of the fire alarm panel via a voltage increase.

Audible/visual notification device in clear color for signaling fire hazards, approved according to EN 54-3, EN 54-23 and VdS. The sounder/beacon is impressive due to its safe and simple mounting with external lugs or internal holes, simple electrical connection on the bottom of the casing. The sounder/beacon is impact-proof.
Equipped with an electronic soft start module for operation directly on a primary control group of the fire alarm panel via a voltage increase.

Audible/visual notification device in red color for signaling fire hazards, approved according to EN 54-3, EN 54-23 and VdS. The sounder/beacon is impressive due to its safe and simple mounting with external lugs or internal holes, simple electrical connection on the bottom of the casing. The sounder/beacon is impact-proof. Equipped with an electronic soft start module for operation directly on a primary control group of the fire alarm panel via a voltage increase.

The SUX5000 AP NFC is a monitoring module for the installation of fault and alarm signal transmitters in
two-wire loop systems with individual identification.
It allows the individual addressing of dry contactors such as pressure switches, limit switches, float switches or temperature switches, with plain text information to FMZ 5000/FMZ6000 or Loop AP-compatible fire alarm systems. Addressing is done via of DIP switches or the Android App “LoopAssign”. The Monitoring module SUX5000 AP NFC has an NFC interface for contactless configuration of the module and its address on the Loop AP.

Analogue addressable manual call point for outdoor areas, in accordance with EN 54-11. Applicable for operation in fire alarm panels with Loop AP protocol. Addressing via DIP switches; the address can also be modified after installation. The detector has a built-in isolator.
If the labeling does not comply with VdS or EN 54-11 standards, part no. 910815 or 910725 must be used.
The white internal plate can be replaced by other labeling
(see DMX External application accessories).
If the labeling does not comply with applicable standards, the VdS and EN 54-11 approvals will void.

The manual call point in the yellow enclosure according to EN 12094-3 can be used for the electrical triggering of gas extin-guishing systems. If the labeling does not comply with VdS or EN 12094-3, part no. 910553 or 910725 may be used.
If the labeling does not comply with applicable standards, the VdS and EN 12094-3 approvals will void.

Audible notification device for the signaling of fire hazards, approved according to EN 54-3 and VdS. The sounder is especially suitable for use in industrial environments with hazardous areas in zone 2 as well as 22. Equipped with an electronic module for operation directly on a primary control group of the fire alarm panel via a voltage increase.